Shipping Methods for Truck-Mounted Water Well Drilling Rigs

Flat Rack or Open-Top Container

For smaller truck-mounted rigs that can be partially disassembled (e.g., removing the mast or drill head), flat rack containers provide a secure and stackable solution. Open-top containers allow top-loading for oversized components. These methods offer better protection than RoRo and are suitable for international shipping.

Bulk cargo Shipping

If the rig is too large for standard containers, bulk cargo shipping is used. The rig is loaded onto a vessel using cranes and secured directly on the deck or in the hold. This method handles extreme dimensions but requires careful lashing, dunnage, and sometimes custom cradles. It is slower but cheaper and necessary for very large rigs.

Lowboy Trailers (Overland Transport)

For domestic or regional deliveries, lowboy or step-deck trailers are used. These specialized trailers have a low deck height to accommodate the rig’s height. Permits for oversized loads are often required, along with escort vehicles. This method is flexible and door-to-door but limited by road regulations.

In summary, the choice of shipping method depends on the rig’s dimensions, destination, budget, and transit time. RoRo and bulk cargo are common for international moves, while lowboy trailers dominate overland routes. Proper planning and professional logistics partners are key to a successful shipment.

JCDRILL provides not only professional truck drilling rig solutions, but also reliable, professional shipping services to fully safeguard your JCD truck drilling rigs during transit.

JCDRILL truck rigs are always your best choice.