Summer Maintenance Methods For Water Well Drilling Rig

1. Clean and lubricate ‌ daily

①After the operation is completed, clean the oil and dirt on the surface of the equipment. Pay special attention to applying high-temperature resistant grease to the friction parts such as the steel wire rope and bearings to prevent the grease from drying up and causing wear.

② Regularly check the lubrication of the hoist and the mast track to ensure the flexible operation of the moving parts.

2. Specialized maintenance of hydraulic system ‌

① Test the quality and quantity of the hydraulic oil every week. In high-temperature environments, prioritize the use of high-temperature resistant hydraulic oil. Replace deteriorated oil in a timely manner and clean the oil tank filter.

② Check the sealing of the hydraulic pipeline to prevent oil leakage or air intake problems caused by loose joints

‌ 3. Heat dissipation system strengthened management ‌

① Clean the dust and blockages on the surface of the radiator to ensure the normal operation of the cooling fan and prevent the motor from shutting down due to high temperature.

② During the hot season, appropriately shorten the continuous operation time and stop the machine intermittently for heat dissipation.

‌

4. Electrical protection and inspection ‌

①Check the insulation aging of relays and circuits. Install waterproof covers during the rainy season to prevent short circuits. After humid weather, dry the equipment.

② Regularly clean the oil stains on mechanical parts such as chucks and brakes to prevent slippage faults caused by high temperatures.

‌

5. Anti-rust treatment during the period of deactivation ‌

When idle for a long time, apply anti-rust grease to the exposed metal surfaces of the drill pipe and wrap them with moisture-proof materials, and store them in a cool and well-ventilated place

With manufacturing experience and export expertise, JCDRILL provides reliable and terrain-specific drilling solutions to customers worldwide.